Online. Trimming module Page Published on Monday, January 6, 1997 by Gideon Ariel Trimming Module Hi- Gideon asked me to respond to your question regarding trimming video sequences that are recorded at different frame rates. When trimming several video clips simultaneously, the clips must all be recorded at the same rate. With your data you can Trim the 25 Hz cameras simultaneously, but the 300Hz clip would have to be separately trimmed. Each clip would also have to have the synch image properly specified. The ability to trim clips with differend frame rates is planned for the next revision. It clearly will be a nice feature, however it adds to the complexity of the process considerably. Please let me know if I can be of assistance. Jeremy Wise Dir R&D ----- Original Message ----- From: ariel1 at netcom <info@arieldynamics.com> To: Jeremy Wise <jeremy@arielnet.com> Sent: Monday, April 10, 2000 12:59 PM Subject: Fw: Different Frequencies > > Hello, > > > > Thank you for your immediate response. We know how to digitize with > > different camera frequencies in the digitizing module. We have a problem > > synchonizing and trimming the different frequencies in the trimming > module. > > How can we do it? > > > > Yours sincereley, > > > > Juergen Jans > > > > > Hello Juergen Jans, > > > > > > Thank you for your message. The Ariel Performance Analysis System > > > (APAS) > > > is a video based movement analysis system based on the PC computer. > > > The > > > APAS fully supports using cameras of different frequencies. Video > > > images > > > are captured to the computer hard disk drive using either an Analog > > > (NTSC/PAL) frame grabber or more recently, the Digital Video (DV) frame > > > grabber. > > > > > > What format is the 300 Hz video? Can these images be saved to AVI > > > format? > > > > > > Please contact us for any additional information. > > > > > > Ariel Dynamics, Inc. > > > 4891 Ronson Court > > > Suite F > > > San Diego, California 92111 USA > > > Tel: (858) 874-2547 > > > Fax: (858) 874-2549 > > > Email: info@arieldynamics.com > > > > > > > > > > > > > > > ----- Original Message ----- > > > From: Jrgen Jans <Juergen.Jans@gmx.de> > > > To: <gideon@arielnet.com> > > > Sent: Tuesday, April 04, 2000 4:20 AM > > > Subject: different Frequencies > > > > > > > > > > Dear Gideon Ariel, > > > > > > > > I have a question concering camera frequencies. Is it possible to > > > digitize > > > > with different camera frequencies (three dimensional analysis)? We > > > have > > > one > > > > high speed camera with 300 frames per second and five cameras with 25 > > > full > > > > images per second and would like to use them together. > > > > > > > > Yours sincerely, > > > > > > > > Juergen Jans > > > > > > > > -- > > > > Sent through GMX FreeMail - http://www.gmx.net > > > > > > > > > > > > > > -- > > Sent through GMX FreeMail - http://www.gmx.net > Reference: /topics/faq/trimming_module.htm